Reasons Your Water Heater Isn't Functioning
Reasons Your Water Heater Isn't Functioning
Blog Article
Have you been in search of facts and techniques about What Would Cause My Electric Water Heater to Stop Working??
Several modern homes use an electrical hot water heater for their heating unit, due to its benefit as well as convenience of use. However, just like any other electrical devices, troubles may occur with its use, all of a sudden. It can be actually frustrating to wake up to a chilly shower rather than a warm one or having your bathroom with water that isn't warm enough or even as well warm. Whatever the instance might be, hot water heater problems can be quite stressful. Luckily, we have actually made a checklist of feasible solutions to your water heater issues. There are a number of elements that might trigger much of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it repaired should not pose too much of a concern if you adhere to these actions:
Examine Your Power Supply:
As standard as this might appear, it is really needed. Without appropriate power, your water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power trouble. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, simply turn it on and off once again. Replace any type of damaged or damaged fuse. Check the home appliance with power after these changes to see if it's now working.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, after that try looking into your heating element if it is still functioning. Evaluate each of your burner to be sure the trouble isn't with any of them. If any one of them is faulty, change that component and then inspect whether the hot water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to inspect the temperature level settings on your upper thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel and also press the red button for temperature reset over the thermostat. This ought to help warm the water. Turn the circuit breaker back on and also inspect if the problem has actually been fixed.
Call A Professional:
If after changing all defective parts and also resetting your temperature, the hot water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert opinion. The issue with your heater could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, a specialist plumber would help fix the issue.
Conclusion
Hot water heater problems are not constantly significant. A lot of them result from minor issues like a blown fuse or damaged heating element. Changing the malfunctioning parts must do the trick. Nonetheless, if you are still not able to solve the issue, give a call to your nearest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We are very intrigued by How to Troubleshoot and Repair an Electric Water Heater and I am assuming you liked our entry. If you please take the time to share this blog post if you liked it. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Estimate Free
Report this page